User Manual of Embedded Net DVS
Chapter 3 Video Server Setup
There are three kinds of methods to configure the parameters of video server.
1.
Through Hyper Terminal (connect DVS with the PC through RE-232 serial ports)
2.
Through TELNET (connect DVS with PC through network)
3.
Through client-end application software (connect DVS with PC through network)
3.1
Parameter Setup through RS-232 serial port
Mainly set up IP parameters of the video server through serial port. The defaulted IP address
is 192.0.0.62.
Under the case that the IP address is unknown; the Hyper Terminal (need to connect the serial
ports) can only be adopted to configure IP address and other parameters. Under the case that IP
address is known, TELNET can be adopted to configure IP address and other parameters, and can
also modify the IP address by using client-end software.
3.1.1 Hyper Terminal Setup
Please direct connect the RS-232 serial port of PC with the RS-232 serial port of video server
before configuration (there are RJ45 head and DB9 line in the packing carton)
How to establish the connection with the super terminal connection?
Step one:
Enter into Hyper Terminal. Click “Start”
Æ
“Programs”
Æ
“Accessories”
Æ
“Communications”
Æ
“Hyper Terminal” in Windows system, and the dialogue box below will
appear (Fig. 3.1.1):
- 12 -
