10
Step: Disconnect and Save Session.
According to the tips, disconnect and save session “aa” for the next time.
After saving, there will be a new “Hyper Terminal” item established in the program group “Start”
“Programs”
“Accessories”
“Communications”
“Hyper Terminal” and “Connection” names of all
Hyper Terminal are included. Here you can see an icon named “aa”.
3.1.2 Configuration by Hyper Terminal
Enter Hyper Terminal
Click “Start”
“Programs”
“Accessories”
“Communications”
“Hyper Terminal”
“aa”, then the
Hyper Terminal interface will appear as figure below. Type Enter, and the prompt “Embedded Decoder”
will appear which means connection between RS-232 interface of PC and RS-232 interface of DS-6001DI
is established successfully by Hyper Terminal. The following operation commands are to accomplish the
parameters setup in the prompt.
