User Manual of DS-3WF03C-D
Outdoor Video Wireless Network Bridge
40
Chapter 11
AC Management
AC Management page is shown in figure. After this function is enabled, the AC
management system must be use
d.
Figure 11-1 AC Management
WTP Name
: It’s the name of the device that is displayed on the AC.
WTP Location:
It’s the location information that is displayed on the AC.
AC IP
: This IP address can add up to eight, add the IP address is AC management
interface’s IP and equipment is the same segment. After the AC control function is
enabled, click save, application, this time the device will take effect on the AC
configuration and restart, the device will join AC. After the AC control function is
enabled, the user is able to display the current state of the page on the device page.
After the AC control function is disabled, the user is able to modify the device's page.
The client must be able to join the AC after it is connected to an access point that has
been joined to the AC.
