DS-3E05 Series Gigabit Ethernet Switch Installation Manual
13
Chapter 3 Physical Connection
3.1 Connecting RJ45 Port
Use a network cable to connect your switch to the RJ45 port of an opposite end device. The RJ45
port can connect network camera, IP camera, NVR, and switch, etc.
Aggregation Switch
Figure 3-1
RJ45 Port Connection (for DS-3E0509)
3.2 Connecting SFP Port
The steps below take 2-fiber SFP optical module as an example.
Step 1
Insert one end of the SFP optical module without handle to the SFP port of the switch.
Step 2
Insert the two optical fiber connectors on one end of the optical fiber to the Rx and Tx ports
of the optical module respectively.
Step 3
Insert the two optical fiber connectors on the other end of the optical fiber to the Rx and Tx
ports of the opposite end device respectively.
3.3 Checking the Cabling
Before powering on your switch, check the following items:
Summary of Contents for DS-3E0105P-E
Page 1: ...DS 3E05 Series Gigabit Ethernet Switch Installation Manual...
Page 16: ...0...
