Emissivity: Set the emissivity of your
target as the effectiveness in emitting
energy as thermal radiation.
Note:
Refer to the 6.1 Common
Material Emissivity Reference for
emissivity values.
Temperature: Set the average
temperature of the environment.
Distance (m/feet): Set the straight-line
distance between the target and the
device.
Note
: The recommended
thermometry distance is 0.2 m to 2
m with target size 80 × 80 mm.
Rule: Select Hot Spot, Cold Spot to
show the max. temperature, min.
temperature in the live view interface.
4
Press
/
button to select
desired parameter, and press
button to enable it.
5
If necessary, press
/
button
to increases / decrease the setting
values. Hold
/
button to
change the value quickly.
6
Press
button to save and exit.
4.2
Other Configurations
Here is an example of setting laser light
function.
Steps:
1
In the live view interface, press
button show the menu bar.
2
Press
/
button to select
Laser.
3
Press
button to turn on / turn off
laser light function.
4
Press
button to save and exit.
5
In live view interface, pull the trigger to
turn on laser light, release the trigger to
turn off laser light.
Note
: Other parameters, such as temperature
measurement range, unit, palettes and so on,
can be configured as steps above.
5
System Information
Go to Menu > About to view the device
information: Model, Version No., FPGA Version
No., Serial No., Capacity and so on.
You can also set the auto power-off duration,
date and time in Menu.
