HIKVISION DS-2DF8C425MHS-DEL User Manual Download Page 85

Page: 85 / 117

2. Optional: Check Tuning Mode.

Note

Tuning mode is to display the information that helps debugging the function. This mode is

reserved for technical support.

3. Set the Duration.

The device stops tracking when it tracks a target uninterruptedly for the set duration.

4. Set the zooming control and other tracking parameters.

Zooming Control

Two modes are available. Controlled by target frame or by tilt angle of the device.
By Tilt Angle

The device calculates the tracking zoom ratio automatically according to the tilt angle of

the device.

Note

The attitude of the device affects the accuracy of this zooming control mode. For the

model with a built-in gyroscope, try to calibrate the attitude if some zooming problems

happen during tracking. See Set Device Position for instructions.

By Target Frame

The tracked target has a virtual frame around. The device calculates a suitable zoom ratio

according to the frame and the set Tracking Zoom Ratio. Larger value means bigger zoom

ratio.

Wait to Stop Tracking If Low Validity

The validity is an internal parameter that helps judge whether the device should keep

tracking or not. This parameter is the waiting time level before the device stops tracking

when the validity is low. Larger value means longer waiting time.

Wait to Lower Tracking Speed If Low Validity

The validity is an internal parameter that helps judge whether the PTZ channel should lower

the tracking speed or not. This parameter is the waiting time level before the device lowers

the tracking speed when the validity is low. Larger value means longer waiting time.

5. Click Save.

Network Speed Dome User Manual

Summary of Contents for DS-2DF8C425MHS-DEL






















































































































Search results

Summary of Contents for DS-2DF8C425MHS-DEL

Reviews:

Related manuals for DS-2DF8C425MHS-DEL

Brands by name

Popular brands

HIKVISION DS-2DF8C425MHS-DEL, User Manual

Search results

Summary of Contents for DS-2DF8C425MHS-DEL

Reviews:

Related manuals for DS-2DF8C425MHS-DEL

Brands by name

Popular brands