HIKVISION DS-2DF7C425IXR-AEL(T5), User Manual, Page: 64 / 122

Note
For Linked Scene configuration, refer to Scene Mode .
3. Click Save.
Set Link to Preset
You can set a preset to switch the image to a linked scene.
Steps
1. Check Link to Preset.
2. Select a preset.
3. Check and set a time period and a linked scene mode.
4. Click Save.
6.6.3 Mirror
When the live view image is the reverse of the actual scene, this function helps to display the
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the function is enabled.
6.6.4 Video Standard
Video standard is an ability of a video card or video display device that defines the amount of
colors that are shown and the resolution. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are transmitted each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country/region.
6.7 OSD
You can customize OSD (On-screen Display) information such as device name, time/date, font,
color, and text overlay displayed on video stream.
Go to OSD setting page: Configuration → Image → OSD Settings . Set the corresponding
parameters, and click Save to take effect.
Network Speed Dome User Manual
52