User Manual of IR Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
53
Figure 6-17
802.1X Settings
3.
Check the
Enable IEEE 802.1X
checkbox to enable it.
4.
Configure the 802.1X settings, including user name and password.
Note:
The EAP-MD5 version must be identical with that of the router or the
switch.
5.
Enter the user name and password (issued by the CA) to access the server.
6.
Click
to finish the settings.
Note
:
The camera reboots when you save the settings.
7.
After the configuration, connect the camera to the protected network.
6.3.7
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1.
Enter the QoS Settings interface:
Configuration >Advanced Configuration >
Network > QoS
Figure 6-18
QoS Settings
2.
Configure the QoS settings, including video/audio DSCP, event/alarm DSCP and
Management DSCP.
The valid DSCP value ranges from 0 to 63. The DSCP value is bigger, the priority is
higher.
3.
Click
to save the settings.
www.cctvireland.ie
Summary of Contents for DS-2DF7284-AW
Page 108: ...www cctvireland ie...