Ex
Explosion-proof Dome
·
Quick Start Guide
7
3.
Route the cables into the bracket body. Insert three preassemble screws into the
preassemble screw holes on the cable joint (do not tighten the preassemble
screws) as shown in Figure 2-5.
Cable Joint
Preassemble Screws
Grounding Stud
Figure 2-5
Insert the Screws
Note:
The grounding stud is used for grounding connection to avoid the accumulation
of static electricity
4.
Align the bracket with the cable joint and rotate the bracket clockwise until
three preassemble screws on the cable joint hooks onto three slots on the
bracket as shown in Figure 2-6.
Bracket
Slots
Figure 2-6
Rotate the Bracket
5.
Screw three fixing screws into the fixing screws holes on the bracket. Then
tighten three preassemble screws to secure the speed dome as shown in Figure
2-7.