User Manual of Explosion-proof Dome
© Hikvision
45
Figure 5-15
Tampering Alarm
2.
Check
Enable
checkbox to enable the tampering detection.
3.
Click
tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to
Section
5.2.1 Configuring Motion Detection
4.
Click
tab to select the linkage method taken for tampering, notify
surveillance center, send email and trigger alarm output are selectable. Refer to
Section
5.
Click
to save the settings.
5.2.3
Configuring Video Loss
Steps:
1.
Enter the Video Loss setting interface:
Configuration > Event > Basic Event > Video Loss