© Hikvision
4.5.4
Setting/Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1.
In the PTZ control panel, click
to enter the patrol settings interface.
2.
Select a patrol number from the list and click
.
3.
Click
to enter the adding interface of preset, as shown in Figure 4-9.
Figure 4-9
Adding Presets
4.
Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol Time
It is the duration staying on one patrol point. The camera moves to
another patrol point after the patrol time.
Patrol Speed
It is the speed of moving from one preset to another.
5.
Click OK to save a preset into the patrol.
6.
Repeat the steps from 3 to 5 to add more presets.
7.
Click OK to save all the patrol settings.
Calling a Patrol:
In the PTZ control panel, select a defined patrol from the list and click
to call the patrol, as
shown in Figure 4-10.
Summary of Contents for DS-2DE4425W-DE3
Page 1: ...Network Speed Dome User Manual UD09562B...
Page 9: ...Hikvision SADP SOFTWARE INTRODUCTION 113...
Page 124: ...Hikvision Figure A 1 2 Modify Network Parameters...
Page 125: ......
