HIKVISION DS-2CS54C8T-PH, User Manual, Page: 6 / 12

2 Installation
2.1 Installation Preparation
Before you start:

Make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is power-off
during the installation.

Check the specification of the products for the
installation environment.

Check whether the power supply is matched with
your required output to avoid damage.

Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.

If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.

If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.2 Installing the Covert Camera
Both wall mounting and ceiling mounting are suitable
for the covert camera.
Wall Mounting
Ceiling Mounting
Figure 2-1 Wall Mounting and Ceiling Mounting
Note:

Secure the camera with screw 1 to rotate the camera
on the panning direction.

Secure the camera with screws 2 to move the camera
left and right.
2 1 2
Mounting Screws
Figure 2-2 Mounting Screws
Steps:
1.
Use the PA2 screw to fix the bracket to the place
where you want to install the camera.