3 Menu Operation
Figure 3-1 Main Menu
DAY&NIGHT
BACKLIGHT
INDOOR
OUTDOOR
INDOOR1
LOW-
LIGHT
MANUAL
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
BLC
HSBLC
ATW
AWC-SET
MANUAL
COLOR
B/W
EXT
2D NR
3D NR
CAM
TITLE
D-EFFECT
MOTION
PRIVACY
LAUGUAGE
DEFECT
VERSION
SHARPNESS
MONITOR
LSC
VIDEO.
OUT
SETUP
SMART
FOCUS
You can call the menu and adjust the camera
parameters with a coaxial camera controller
(purchase separately). You can also call the menu
with supported TVI DVR.
3.1 VIDEO.OUT
PAL or NTSC is selectable .
3.2 LANGUAGE
English, Japanese, CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, etc., are selectable.
3.3 SETUP
3.3.2 SCENE
You can select indoor, outdoor, indoor 1 and low
-light as the working environments.
3.3.3 LENS
The camera is equipped with 2.8-12mm motorized
vari-focal lens.
3.3.4 EXPOSURE
EXPOSURE
1. SHUTTER
AUTO
2. AGC
OFF
3. SENS-UP
---
4. BRIGHTNESS
---|------ 40
5. DEFOG
OFF
6. D-WDR
OFF
7. RETURN
RET
Figure 3-2 Exposure
SHUT TER
: AUTO,1/25, 1/50, FLK, 1/200, 1/400,
1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,
and x15 are selectable.
: You can set the AGC value from 0 to 15.
AGC
: You can set the SENS-UP to OFF or AUTO.
SENS-UP
: You can set the brightness value
BRIGHTNESS
from 1 to 100.
: You can set the defog function as ON to
DEFOG
enable the function. Position, size, and the defog
gradation are configurable.
You can set the D-WDR as ON or OFF.
D-WDR:
3.3.5 Backlight
Backlight Compensation (BLC):
Set the gain of BLC as High, Middle, or Low.
-GAIN:
Press the up/down/left/right button to
-AREA:
define the BLC position and size. Select RET or
AGAIN to go back the BLC menu or re-define the
BLC area.
Restore the BLC settings to the default.
-Default:
HSBLC:
Select an HSBLC area. Set the DISPLAY
status as ON. Press the up/down/left/right button
to define the area position and size. Set the HSBLC
LEVEL from 0 to 100. Select ALL DAY or Night for the
HSBLC mode. Set the BLACK MASK status as ON or
OFF.
HSBLC
1. SELECT
AREA 1
2. DISPLAY
ON
8
3. LEVEL
---|------ 40
4. MODE
ALL DAY
5. BLACK MASK
ON
6. DEFAULT
8
7. RETURN
RET
Figure 3-3 HSBLC
3.3.6 White Balance (WB)
MANUAL, ATW (Auto-tracking White Balance),
AWC→SET are selectable.
3.3.7 Day & Night
Color, B/W, and EXT are selectable for DAY and
NIGHT switches.
3.3.8 NR
: You can set 2D NR status as ON or OFF.
2D NR
: Set the Smart NR status as ON and adjust
3D NR
the 3D smart NR sensitivity ranges from 0 to 100.
Set the 3D NR LEVEL ranges from 0 to 100. Set the
2D&3D NR
1. 2DNR
OFF
2. 3DNR
ON
8
3. RETURN
RET
3D NR
1. SMART NR
ON
8
2. LEVEL
------|--8 0
3. START. AGC -|--------10
4. END. AGC
-|--------10
5. RETURN
RET
Figure 3-4 NR
Figure 3-5 3D NR
3.3.9 SPECIAL
Edit the camera title on this section.
Camera Title:
D-effect:
Set the freeze function as ON or OFF.
-FREEZE:
OFF, MIRROR, V-FLIP, and ROTATE are
-MIRROR:
selectable for mirror.
Define the zoom area by configuring
-D-ZOOM:
the position from PAN & TILT.
The D-Zoom area, sensitivity
-SMART D-ZOOM:
and time are configurable.
Set the NEG IMAGE as ON or OFF.
-NEG.IMAGE:
SPECIAL
1. CAM TITLE
ON
8
2. D-DFFECT
8
3. MOTION
OFF
4. PRIVACY
OFF
5. DEFECT
8
6. RETURN
RET
Figure 3-6 Special
MOTION
1. SELECT
AREA 1
2. DISPLAY
ON
8
3. SENSITIVITY
----|---- 30
4. MOTION VIEW ON
5. DEFAULT
8
6. RETURN
RET
Figure 3-7 Motion Detection
Motion
: Select a MOTION area. Set the DISPLAY
status as ON or OFF. Press the up/down/left/right
button to define the position and size of the area.
Set the SENSITIVITY from 0 to 60. Set the MOTION
VIEW status as ON or OFF.
Privacy
: Select a PRIVACY area. Set the DISPLAY
status as INV, MOSAIC, COLOR or OFF. Press the
up/down/left/right button to define the position
and size of the area.
Defect
: LIVE DPC, STATIC DPC and Black DPC are
adjustable in this section.
PRIVACY
1. SELECT
AREA 1
2. DISPLAY
MOSAIC
8
3. COLOR
10
4. TRANS.
1
5. DEFAULT
8
6. RETURN
RET
ADJUST
1. SHARPNESS
--------|15
2. MONITOR
LCD
8
3. LSC
OFF
4. RETURN
RET
3.3.10 ADJUST
: Adjust the sharpness from 0 to 15.
Sharpness
: Monitor CRT, and Monitor LCD are
Monitor
selectable.
: Set the LSC status as ON or OFF.
LSC
3.3.11 RESET
Reset all the settings to the default.
3.3.12 EXIT
Press OK to exit the menu.
START. AGC level as the threshold to enable AGC,
and set the END. AGC level as the threshold to
disable AGC.
Figure 3-8 Privacy Mask
Figure 3-9 Adjust
3.3.1 SMART FOCUS
Move the joystick to adjust the camera lens by the
FOCUS+, FOCUS-, ZOOM+ and ZOOM-. The smart
focus value turns higher when the focusing
effectiveness turns better. The value range is 0~99.
Steps:
1.Drill the screw holes and the cable hole in the
ceiling according to the supplied drill template.
2.Screw the bolts through the mount by aligning
with the 2 bolt holes. Fit the toggles onto the bolts.
3.Push the two toggle bolts through the two screw
holes on the ceiling. Rotate the bolt till the toggle
holds the ceiling tightly.
2.2 In-ceiling Mounting
Figure 2-5 Install the Mount
4.Route and connect the corresponding cables.
5.Fix the camera to the in-ceiling mount with the
supplied screws.
Figure 2-3 Fix the Camera to the Ceiling
6. Connect the corresponding cables.
7. Adjust the camera according to the figure below
to get an optimum angle.
8. Fit the black liner on the camera and tighten the
screws on the bubble of type 1 camera or rotate the
bubble of type 2 camera to complete.
Figure 2-4 3-axis Adjustment
You need to purchase an in-ceiling mount separately
if you adopt in-celling mounting.
Type I:
Type I :
I
Type I :
I
Type I :
I
P Direction
R Direction
T Direction
Type I:
T Direction
R Direction
P Direction
Type I :
I
5.Align the camera with the back box/base plate,
and tighten the set screws to secure the camera
with the back box/base plate.
Type I:
Type I :
I
Figure 2-6 Fix the Camera to the Mount
Figure 2-8 Fix the Camera to the Gang Box
6. Repeat steps 6-8 of the Ceiling Mounting section
to complete the installation.
2.3 In-ceiling Mounting with
Gang Box
Only the type 1 camera supports in-ceiling
mounting with gang box.
1.Repeat steps 2-4 of the In-ceiling Mounting
section to secure the in-ceiling mount (supplied)
to the gang box.
Figure 2-7 Install the Mount
2.Route and connect the corresponding cables.
3.Align the camera with the gang box, and tighten
the screws to secure the camera with the gang box..
4. Repeat steps 6-8 of the Ceiling Mounting section
to complete the installation.
0°
~
75°
0°
~
355°
0°
~
355°
0
°
~
340
°
0
°
~
3 55
°
0
°
~
75
°