HIKVISION DS-2CE17H0T-IT3F User Manual Download Page 3

UM DS-2CE17H0T-IT3F 052220NA 

2012/19/EU (WEEE Directive):

 Products marked 

with this symbol cannot be disposed of as 
unsorted municipal waste in the European 
Union. For proper recycling, return this product 
to your local supplier upon the purchase of 
equivalent new equipment, or dispose of it at 
designated collection points. For more 
information see: 

www.recyclethis.info.

  

2006/66/EC (Battery Directive):

 This product 

contains a battery that cannot be disposed 
of as unsorted municipal waste in the 
European Union. See the product 
documentation for specific battery 
information. The battery is marked with this 
symbol, which may include lettering to 
indicate cadmium (Cd), lead (Pb), or mercury 
(Hg). For proper recycling, return the battery 
to your supplier or to a designated collection 
point. For more information, see: 
www.recyclethis.info. 

Industry Canada ICES-003 Compliance 

This device meets the CAN ICES-3 (A)/NMB-3(A) 
standards requirements. 

Warning 

This is a class A product. In a domestic environment 
this product may cause radio interference, in which 
case the user may be required to take adequate 
measures. 

Safety Instruction 

These instructions are intended to ensure that the 
user can use the product correctly to avoid danger 
or property loss. 

The precaution measure is divided into “Warnings” 
and “Cautions.” 

Warnings: 

Serious injury or death may occur if any 

of the warnings are neglected. 

Cautions:

 Injury or equipment damage may occur if 

any of the cautions are neglected. 

 

 

Warnings

 

Follow these 
safeguards to prevent 
serious injury or death. 

Cautions 

Follow these 
precautions to prevent 
potential injury or 
material damage. 

 

 

 

Summary of Contents for DS-2CE17H0T-IT3F
















Reviews: