HIKVISION DS-2CE16D0T-IT1 User Manual Download Page 2

Regulatory Information 

FCC Information 

FCC compliance: This equipment has been tested and 
found to comply with the limits for a Class A digital 

device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection 

against harmful interference when the equipment is 

operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to 

radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference in 

which case the user will be required to correct the 

interference at his own expense. 
FCC Conditions 

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference received, 
including interference that may cause undesired 

operation 
EU Conformity Statement 

This product and - if applicable - the 
supplied accessories too are marked with 

"CE" and comply therefore with the 

applicable harmonized European 

standards listed under the EMC Directive 2014/30/EU, 

the RoHS Directive 2011/65/EU. 

2012/19/EU (WEEE directive): Products 
marked with this symbol cannot be 
disposed of as unsorted municipal waste in 
the European Union. For proper recycling, 

return this product to your local supplier 
upon the purchase of equivalent new 

equipment, or dispose of it at designated collection 

points. For more information see: www.recyclethis.info. 

 

Industry Canada ICES-003 Compliance 

This device meets the CAN ICES-3 (A)/NMB-3(A) 
standards requirements. 
Warning 
This is a class A product. In a domestic environment this 
product may cause radio interference in which case the 

user may be required to take adequate measures. 
 
 
 

 

Summary of Contents for DS-2CE16D0T-IT1















Reviews: