Installation Manual of Network Box Camera
4
2.1.2 Rear Panel Description
Serial NO.
Description
1
10M / 100M self-adaptive Ethernet interface
2
Video output interface
3
Audio output interface
4
Power LED indicator, which turns red when power is applied to the unit
5 Power
supply
6
Audio input interface
7
D+, D-: RS-485 interface
8
IN, G: Alarm input interface
9
1A, 1B: Alarm output interface
10 Ground
11
RESET: Reset all parameters to factory default settings
NOTE:
When the camera is power up, press the ‘RESET’ button for about 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be
reset to the factory default settings
.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©