HIKVISION DS-2CD7A26G0P-IZHS, Installation And Configuration Installation And Configuration Manual, Page: 8 / 13

DS-2CD7A26G0P-IZHS(8) License Plate Recognition (LPR) Camera Installation and Configuration Guide
ICG DS-2CD7A26G0P-IZHS(8) LPR Camera 080619NA 8
1111 Installation
Installation Installation
Installation A
A A
Angle
ngle ngle
ngle
The ideal vertical image capture angle to the target license plate is 0 degrees, or straight
horizontal.
However, since in reality vehicles/license plates have differences in heights, it may be necessary
to mount the camera higher, increasing the vertical image capture angle.

Vertical angle should be 15 degrees (recommended).

Horizontal angle should be 15 degrees (recommended).
: For entrance surveillance, the camera height (H) should be approximately 1.5 to 2
meters.
2 2 2 2 Pixel Requirement Pixel Requirement Pixel Requirement Pixel Requirement
Purpose Purpose Purpose Purpose
The dimensions of the license plate vary by location. To get a valid image on the LPR camera,
you need to measure the plate size and define the minimum valid pixels in the live view.
1. Capture a live view picture of a passing vehicle.
2. Measure the license plate pixels.