5
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Chapter 3 Installation
Note:
1.
Please check if all the items on the package list have been included with your camera.
2.
Read the following contents carefully before the installation.
3.
Make sure that all the related equipment is power-off during the installation.
4.
Check the power supply to prevent any damage caused by mismatching problems.
5.
Do not place the camera in extremely hot or damp environment. To avoid heat
accumulation, good ventilation is required for a proper operating environment.
6.
If the product does not operate properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.
Indoor IP Dome Camera Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:
Figure 3.1
Step 1: Use the screws to fix the bottom plate on the ceiling, and rotate dome camera
counterclockwise to attach it to the bottom plate, and finally use the lock screw to secure the dome
camera.
Note:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back box
and then feed cables through the opening
to secure on the ceiling.
