HIKVISION DS-2CD5A46G0-IZ/UH, User Manual, Page: 161 / 192

Network Camera User Manual
160
•
Upload to FTP/Memory Card/NAS: Capture the image when an alarm is
triggered and upload the picture to a FTP server. And save the picture on the
local SD card or connected NAS.
9.
Click the Save button to activate the settings.
Queue Management
Queue Management is a function to detect queuing-up people number and waiting
time of each person.
The camera also generates reports to compare the efficiency of different queuing-ups
and display the changing status of one queue.
To use the function, you should set up detection rules first. To see the statistics of
queue management, go to Application .
Note:
Queue management is only supported by certain camera models.
Rule Settings
The camera supports Regional People Queuing-Up and Waiting Time Detection .
Check checkbox to enable the desired function.
Regional People Queuing-Up : the function detects and calculates queuing-up
persons in defined regions, and trigger alarms when the people number exceeds the
set thresholds.
Waiting Time Detection : the function detects and calculates the waiting time of
each person that enters the detection area, and trigger alarms when waiting time
exceeds the set thresholds.
Steps:
1.
Area Settings.
a)
Add a region.
A region is the defined area in which the detections are active.
When drawing the regions, note that a valid region-entering action of a target