manualshive.com logo in svg

HIKVISION DS-2CD5126G0-IZS, User Manual, Page: 102 / 186

Share
Download
HIKVISION DS-2CD5126G0-IZS User Manual Download Page 102

Network Camera User Manual 

101 

 

illumination. 

 

 

Day/Night Scheduled-Switch Configuration Interface 

Steps: 

1.

 

Click the calendar icon to select the start time and the end time of the switch. 

Notes: 

•

 

The start time and end time refer to the valid time for day mode. 

•

 

The time period can start and end on two days in a row. For example, if you 

set start time as 10:00 and end time as 1:00, the day mode will be activated at 

10 o'clock in the morning and stopped at 1 o'clock early in the next morning. 

2.

 

Click  Common  tab  to  configure  the  common  parameters  applicable  to  the  day 

mode and night mode. 

Note: 

For the detailed information of each parameter, please refer to 

Section 9.1.1

 

Day/Night Auto-Switch.

 

3.

 

Click Day tab to configure the parameters applicable for day mode. 

4.

 

Click Night tab to configure the parameters applicable for night mode. 

Note: 

The settings saved automatically if any parameter is changed.

 

 

Configuring OSD Settings 

Purpose: 

You can customize the camera name, time/date format, display mode, and OSD size 

displayed on the live view. 

Summary of Contents for DS-2CD5126G0-IZS



























































































































































































Reviews:

No comments