Network Camera User Manual
99
Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or
10 min.
Stream Type: Select the stream type for recording.
Note:
The record parameter configurations vary depending on the camera model.
4.
Select a
Record Type
. The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, and Event.
Continuous
If you select
Continuous
, the video will be recorded automatically according
to the time of the schedule.
Record Triggered by Motion Detection
If you select
Motion Detection
, the video will be recorded when the motion is
detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the
Task 1: Set the Motion Detection Area
in the
Section
Record Triggered by Alarm
If you select
Alarm
, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the
Alarm Type
and check the checkbox of
Trigger Channel
in the
Linkage Method
of
Alarm Input Settings
interface. For detailed information, please refer to
Section 10.1.3
Record Triggered by Motion & Alarm
If you select
Motion & Alarm
, the video will be recorded when the motion
and
alarm are triggered at the same time.