HIKVISION DS-2CD1001-I, Quick Start Manual, Page: 16 / 37

Network Bullet Camera
·
Quick Start Guide
15
Figure 2-2 Fix the Camera on the Ceiling
Note:

In the supplied screw package, both self-tapping screws, and
expansion bolts are contained.

If the ceiling is cement, expansion bolts are required to fix the
camera. If the ceiling is wooden, self-tapping screws are required.
5. Connect the corresponding power cord, and network cable.
6. Power on the camera, and set the network configuration (for
details, refer to
3 Setting the Network Camera over the LAN and 4
Accessing via Web Browser ) to check whether the image is gotten
from the optimum angle. If not, adjust the surveillance angle.
1) Loosen the No.1 adjusting screw to adjust the rotation
position [0° to 360°].
2) Tighten the No.1 adjusting screw.
3) Loosen the No.2 adjusting screw to adjust the tilting position
[-90° to 90°].
4) Tighten the No. 2 adjusting screw.
5) Loosen the No.3 adjusting screw to adjust the pan position [0°
to 360°].