User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
6
Cautions
1.
Make sure the power supply voltage is correct before using the camera.
2.
Do not drop the camera or subject it to physical shock.
3.
Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use
clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period, please replace the lens cap to protect the CCD from dirt.
4.
Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur
otherwise (which is not a malfunction), and affect the endurance of CCD at the same time.
5.
The CCD may be burned out by a laser beam, so when any laser equipment is in using, make
sure that the surface of CCD will not be exposed to the laser beam.
6.
Do not place the camera in extremely hot, cold(the operating temperature shall be-10
℃
~+60
℃
), dusty or damp locations, and do not expose it to high electromagnetic radiation.
7.
To avoid heat accumulation, good ventilation is required for operating environment.
8.
Keep the camera away from liquid while in use.
9.
While in delivery, the camera shall be packed in its original packing, or packing of the same
texture.
10.
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be
replaced regularly according to their average enduring time. The average time varies because of
differences between operating environment and using history, so regular checking is
recommended for all the users. Please contact with your dealer for more details.
11.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided
by the battery manufacturer.