HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual Download Page 109

Page: 109 / 222

Network Video Recorder User Manual

107

Chapter 9 File Management

9.1 Search and Export All Files

9.1.1 Search Files

Purpose

Specify detailed conditions to search videos and pictures.

Step 1

Go to File Management > All Files.

Step 2

Specify detailed conditions, including time, camera, event type, etc.

Figure 9-1

Search All Files

Step 3

Click Search to display results. The matched files will be displayed.

9.1.2 Export Files

Purpose

Export files for backup purposes using a USB device (USB flash drive, USB HDD, USB optical disc
drive), SATA optical disc drive, or eSATA HDD.

Step 1

Search files to export. For details, see 9.1.1 Search Files.

Step 2

Select file(s) and click Export.

Step 3

Select the file to export as Video and Log and click OK.

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series































































































































































































































Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series, User Manual

Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands