HIKVISION DarkFighter DS-2CD5026G0/E-IH, User Manual, Page: 99 / 191

Network Camera User Manual
98
encoding resource to the region of interest, thus to increase the quality of the ROI
whereas the background information is less focused.
Note: ROI function varies according to different camera models.
Steps:
1.
Enter the ROI settings interface: Configuration > Video/Audio > ROI .
2.
Select the Stream Type for ROI encoding.
3.
Check the checkbox of Enable under Fixed Region item.
4.
Set Fixed Region for ROI.
(1)
Select the Region No. from the drop-down list.
(2)
Check the Enable checkbox to enable ROI function for the chosen region.
(3)
Click Drawing . Click and drag the mouse on the view screen to draw a red
rectangle as the ROI region. You can click Clear to cancel former drawing.
Click Stop Drawing when you finish.
(4)
Select the ROI level.
(5)
Enter a region name for the chosen region.
(6)
Click Save the save the settings of ROI settings for chosen fixed region.
(7)
Repeat steps (1) to (6) to setup other fixed regions.
5.
Set Dynamic Region for ROI.
6.
Click Save to save the settings.
Note: ROI level means the image quality enhancing level. The larger the value is, the
better the image quality would be.
Display Info. on Stream
Check the checkbox of Enable Dual-VCA , and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. Then, you can set rules on
the connected rear-end device to detect the events including line crossing, intrusion,
etc.