2.1 Timing mode
1. Selecting Timing in LED Light On, camera will turn on/off the LED supplement light according to
Start/End Time;
2. Setting schedule time according to application requirements. Start time should be earlier than
End Time. Start Time can be on the previous day of End Time.
2.2 Auto mode
1. Camera will detect ambient brightness automatically with Auto mode, and turn on LED light
automatically. The mechanism is similar to the automatic adjustment of infrared supplement
lamplight;
2. Setting filtering time in the range of 0-120s;
When the ambient brightness exceeds the light limit and lasts for a period of time (as shown in the
picture below: 5 seconds), the camera begins to turn the light on and off. This setting prevents the
camera from continuing to turn on and off lights when the brightness changes rapidly;
3. Setting sensitivity in the range of 0-7;
The lower the sensitivity, the greater changing in ambient brightness is required before the camera
can turn on and off the light;
The higher the sensitivity, the lower the requirement of ambient brightness change;
4. Currently, the default mode is Auto. Adjusting the parameters or customizing the firmware if
need to turn off the light by default.
Summary of Contents for ColorVu
Page 4: ......
