ColorVu DS-2CD2xx7G1-L(U) Supplement Light Configuration Quick Start Guide
QSG DS-2CD2xx7G1-L(U) 070219NA
3
SECTION 1: LED Supplement Light Brightness Configuration
NOTES:
When the camera is first supplied power, it performs a self-check with the supplement light at
full power, so avoid staring at it.
The LED supplement light will lock in the light-on state for an hour if is repeatedly switched five
times within a short period of time due to manual testing or ambient brightness changes.
1. Enter the following path to go to the configuration settings:
Configuration > System > System
Settings > External Device.
1.1 Enable Supplement Light
Figure 1, Configuration > External Device: Enable Supplement Light
1.2 LED Light Brightness Adjustment
The
LED Light Brightness
can be set to
Manual Mode
or
Auto Mode
.
1.2.1 Manual Mode
1. Set the
LED Light Brightness Adjustment
to
Manual Mode
.
2. Adjust the
LED Light Brightness
level from 1 to 100 (0 means no brightness).
3. Default is level 15.
