Before you start:
You need to purchase an inclined base separately.
Steps:
1.
Drill 4 screw holes and the cable hole in the ceiling
according to the holes of the inclined base.
2.
Install the inclined base to the ceiling with supplied
screws, as shown in Figure 2-9.
Figure 2-9
Fix the Inclined Base
3.
Route the cables through the cable hole, or the side
opening of the inclined base.
4.
Fix the camera to the inclined base with the
supplied screws.
Figure 2-10
Fix the Camera to the Base
5.
Repeat the steps 7 to 9 of the 2.1 Ceiling Mounting
section to complete the installation.
3
Menu Description
Purpose:
Call the menu by clicking the button on the PTZ
Control interface, or call preset No.95.
Steps:
1.
Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Camera
TVI DVR
Monitor
Figure 3-1
Connection
2.
Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3.
Click PTZ Control to enter the PTZ Control interface.
4.
Call the camera menu by clicking button, or call
preset No. 95.