HIKVISION C30 Series, User Manual, Page: 15 / 38

Video Wall Controller • User Manual
9
Manual Correction
Select the correction range.

Click to correct the entire cabinet screen. Select the screen as required.

Click to correct part of the cabinet screen. Set the start and end coordinates as
required.
Select Correction Type.

Screen Correction
Correct the cabinet.
1. Click Screen Correction.
2. Adjust the red, green, and blue progress bar and the RGB value. The correction will take effect
when the value of the on-site screen is greater than the parameter value of the progress bar.
Check Simultaneous Adjustment. All RGB parameter values will be consistent when adjust any
RGB progress bar.

Seam Correction
Correct the seam between cabinets.
1. Click Seam Correction.
2. Select the correction range.
− Click All, correct all the seams.