Quick Start Guide of Blazer Pro
15
2.
Unfasten stop screws from the
pluggable block
, insert signal cables into slots and fasten stop screws. Ensure
signal cables are in tight.
3.
Connect
pluggable block
back into terminal block.
Controller Connection
To connect a controller to the Blazer Pro:
1.
Disconnect pluggable block from the RS-485 terminal block of secondary board.
2.
Unfasten stop screws from the D+, D-
pluggable block
, insert signal cables into slots and fasten stop screws.
Ensure signal cables are in tight.
3.
Connect Ta on controller to D+ on terminal block and Tb on controller to D- on terminal block. Fasten stop
screws.
4.
Connect
pluggable block
back into terminal block.
Note:
Make sure both the controller and Blazer Pro are grounded.
Power Connection and Startup
Plug the power supply (refer to the
Specifications
) into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
The Power indicator LED on the rear panel should turn green indicating that the unit begins to start up.
After startup, the Power indicator LED remains green.
The server contains two sub-systems: Blazer Pro Storage Device and video management system.
For the first-time access to the video management system, you need to connect a display unit to master board via
VGA or HDMI interface. In this manual, we only introduce the basic settings for video management system. For
detailed configuration about video management system, please refer to the
User Manual of Blazer Pro Web
Manager
.
For operating the Blazer Pro Storage Device locally, you need to connect a display unit to secondary board via
VGA or HDMI interface. For detailed configuration about Blazer Pro Storage Device, please refer to the
User
Manual of Blazer Pro Storage Device.
Network Parameters Settings
You need to properly set the network parameters before you can access to the server via network.
For Video Management System
Before you start:
The video management system (master board) should be properly connected to the network and the video output
should be connected to a display unit.
You also have to connect a USB mouse and USB keyboard via the available USB interface before you can
properly configure the system.
Steps:
1.
Login in the video management system. The default password of the admin user of the operating system is
12345
.
You must change this default password to better protect against security risks, such as the unauthorized
access by others to the product that may prevent the product from functioning properly and/or lead to
