3
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cable, and
then please contact the service center.
If the product does not work properly, contact your
dealer or the nearest service center. Never a�empt to
disassemble the camera by yourself. (We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before
using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch senor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and
wipe it gently. If the camera will not be used for an
extended period, replace the lens cap to protect the
sensor from dirt.
Do not aim the camera at the sun or extra bright
places. Blooming or smearing may occur otherwise
(which is not a malfunc�on), and affect the endurance
of sensor at the same �me.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold, dusty
or damp loca�ons, and do not expose it to high
electromagne�c radia�on.
To avoid heat accumula�on, good ven�la�on is
required for opera�ng environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Symbol Conventions
The symbols that may be found in this document are
defined as follows.
Symbol
Description
Provides
addi�onal
informa�on
to
emphasize or supplement important
points of the main text.
Indicates
a
poten�ally
hazardous
situa�on, which if not avoided, could
result in equipment damage, data loss,
performance
degrada�on,o
r
unexpected results.
Indicates a hazard with a high level of risk,
which if not avoided, will result in death or
serious injury.
