2
2 Installation
2.1 Installation
You can paste the camera with3M gum or fix it with
screws. Choose the installation method according to the
mounting place.
Before you start:
�
Please make sure that the device in the package is in
good condition and all the assembly parts are
included.
�
Make sure that all the related equipment is power-off
during the installation.
�
Check the specification of the products for the
installation environment.
�
Check whether the power supply is matched with your
power output to avoid damage.
�
Be sure that there is enough space to install the
camera and accessories.
�
Make sure the part, which is used to install the camera,
is strong enough to withstand four times the weight of
the camera and the mounting.
�
If the product does not function properly, please
contact your dealer or the nearest service center. Do
not disassemble the camera for repair or maintenance
by yourself.
�
Do not pull and drag the camera cables hard.
3M Gum Mounting
Steps:
1. Clean the mounting surface with a mixture of
isopropyl and water.
Clean Mounting Surface
2. Paste the electrostatic film (in the package) onto
the mounting surface.
Electrostatic Film