HIKVISION AE-MD5043-SD Quick Start Manual Download Page 5

Mobile Video Recorder (-SD) Quick Start Guide 

iv 

recycling, return this product to your local supplier upon the purchase of 
equivalent new equipment, or dispose of it at designated collection points. For 
more information see: www.recyclethis.info 

 

2006/66/EC (battery directive): This product contains a battery that cannot be 
disposed of as unsorted municipal waste in the European Union. See the product 
documentation for specific battery information. The battery is marked with this 
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or 
mercury (Hg). For proper recycling, return the battery to your supplier or to a 
designated collection point. For more information see: www.recyclethis.info 

  

 
The user manual for local area network devices shall contain instructions related to the 
restrictions mentioned in the above sections, namely that: 
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the 
potential for harmful interference to co-channel mobile satellite systems; 
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 
MHz shall comply with the e.i.r.p. limit; and 
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply 
with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. 
 
(i)Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une 
utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de 
satellites mobiles utilisant les mêmes canaux. 
(ii) le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz et 
5470-5725 MHz doivent respecter le pire limiter; et 
(iii) le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doivent 
respecter le pire limites spécifiées pour le point-à-point et l'exploitation non point à point, le cas 
échéant. 
 
Users should also be advised that high-power radars are allocated as primary users (i.e. priority 
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause 
interference and/or damage to LE-LAN devices. 
 
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils 
ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient 
causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

Summary of Contents for AE-MD5043-SD






















Reviews: