Network Video Recorder Quick Start Guide
17
3.7 Network Settings
Purpose:
Network settings must be properly configured before you operate NVR over network.
Step 1
Enter the Network Settings interface.
Menu > Configuration > Network
Figure 3-9
Network Settings
Step 2
Select the General tab.
Step 3
In the General Settings interface, you can configure the following settings: NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
Step 4
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain
an IP address and other network settings from that server.
Step 5
After having configured the general settings, click the Apply button to save the settings.
3.8 Adding IP Cameras
Purpose:
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated. Please refer to the User Manual for activating the inactive IP camera.
