User Manual of DS-6100-ATA Digital Video Server
- 12 -
Chapter 3 Video Server Setup
There are three kinds of methods to configure the parameters of video server.
1.
Through Hyper Terminal (connect DVS with the PC through RS-232 serial ports)
2.
Through client-end application software (connect DVS with PC through network)
3.1 Parameter Setup through RS-232 serial port
Mainly set up IP parameters of the video server through serial port. The default IP address is
192.0.0.64.
Under the case that the IP address is unknown; the Hyper Terminal or NetTerm (need to
connect the serial ports) can be adopted to get or configure IP address and subnet mask. Under the
case that IP address is known, client software can be adopted to configure IP address and other
parameters.
3.1.1 Hyper Terminal Setup
Please direct connect the RS-232 serial port of PC with the RS-232 serial port of video server
before configuration (there are RJ45 head and DB9 line in the packing carton)
How to establish the connection with the super terminal connection?
Step one:
Enter into Hyper Terminal. Click “Start”
“Programs”
“Accessories”
“Communications”
“Hyper Terminal” in Windows system, and the dialogue box below will
appear (Fig. 3.1):
Fig. 3.1 Newly establish a connection and define the name and icon
