Camera Link Line Scan Camera
·
User Manual
81
The camera has different process approaches when you select different device features.
If User Set 1/2/3 is selected as device feature, you need to load the corresponding user set you
selected to take effect. Refer to section Save and Load User Set for details.
If LUT Luminance 1/2/3 is selected as device feature, and they will take effect only when you
select the same parameters in LUT Selector. Refer to section Set LUT for details.
If User PRNUC is selected as device feature, and they will take effect only when you select the
same parameters in PRNUC User Selector. Refer to section Set Shading Correction for details.
11.5 Transport Layer Control
The specific parameters of transport layer control may differ by camera models.
You can go to Transport Layer Control to view the camera’s load size, tap geometry, GenCP version,
etc. The specific parameters in Transport Layer Control and output order of different taps are
shown below.
Table 11-2
Parameters Description
Parameter
Read/Write
Description
Paylode Size(B)
Read only
It is the camera’s load size.
Device Tap Geometry
Read and write
The value of camera sensor geometry in the frame
grabber software should be the same with that of Device
Tap Geometry. Inconsistent parameters may lead to image
exception.
CI Configuration
Read only
It is the configuration mode. It switches automatically in
accordance with different tap configuration mode.
GenCP Version Major
Read only
It is the major version in GenCP version.
GenCP Version Minor
Read only
It is the minor version in GenCP version.
Supported Baudrates
Read only
It displays the supported baud rates.
For specific Device Tap Geometry that the camera supports, refer to the actual one you got. Here
we take Geometry_1X, Geometry_1X2 and Geometry_1X4 as an example.
