
English
29
6) Service
a) Have your power tool serviced by a quali
fi
ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out of reach of children and in
fi
rm persons.
CORDLESS OIL PULSE DRIVER SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces, when performing an operation
where the fastener may contact hidden wiring. Fasteners contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator
an electric shock.
2. This is portable tool for tightening and loosenig screws. Use it only for these
operation.
3. Use the earplugs if using for a long time.
4. One-hand operation is extremely dangerous; hold the unit
fi
rmly with both hands
when operating.
5. After installing the driver bit, pull lightly out the bit to make sure that it does not
come loose. If the bit is not installed properly, it can come loose during use, which
can be dangerous.
6. Use the bit that matches the screw.
7. Tightening a screw with the oil pulse driver at an angle to that screw can damage
the head of the screw and the proper force will not be transmitted to the screw.
Tighten with this oil pulse driver lined up straight with the screw.
8. Always charge the battery at a temperature of 0 – 40°C.
A temperature of less than 0°C will result in over charging which is dangerous. The
battery cannot be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of 20 – 25°C.
9. Do not use the charger continuously.
When one charging is completed, leave the charger for about 15 minutes before
the next charging of battery.
10. Do not allow foreign matter to enter the hole for connecting the battery.
11. Never disassemble the battery and charger.
12. Never short-circuit the battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
13. Do not dispose of the battery in
fi
re.
If the battery burnt, it may explode.
14. Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or in
fl
ammables into the charger air ventilation slots will
result in electrical shock hazard or damaged charger.
000Book̲WHP18DBL̲ChS.indb 29
000Book̲WHP18DBL̲ChS.indb 29
2020/08/25 15:17:52
2020/08/25 15:17:52