English
31
BATTERY REMOVAL/INSTALLATION
1. Battery
removal
Hold the handle tightly and push the battery
latch to remove the battery (see
Fig.
7
).
CAUTION
Never short-circuit the battery.
2. Battery
installation
Insert the battery while observing its
polarities (see
Fig. 7
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 8
.
3. Charging.
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals)
(See
Table 2 on page 32
)
Pull out
Insert
Handle
Latch
Push
Battery
Fig. 7
Battery
Charger
Pilot lamp
Fig. 8
000Book̲W18DA̲ChS.indb 31
000Book̲W18DA̲ChS.indb 31
2022/03/16 15:47:11
2022/03/16 15:47:11