English
54
OPERATION
CAUTION
Pull out battery before carrying out any adjustment, servicing or maintenance.
When
fi
nished with a job, pull out the battery.
1. Switch
operation
This product is equipped with a switch lock to prevent
inadvertent switch operations. (
Fig. 14
)
Pressing the switch lock in one of the indicated directions and
pulling the switch will activate the motor.
Once the switch is activated, it will remain on even after
releasing the switch lock as long as you are pulling on the
switch.
Releasing the switch within area
Ⓐ
will apply a brake that will
stop operation. (
Fig. 15
)
Releasing the switch within area
Ⓑ
will automatically return
the upper cutter and bending roller to their original positions.
(
Fig. 15
)
WARNING
The cutter also simultaneously
activates, so please close the cover.
(Fig. 15)
2. Reverse-rotating the cutter and bending
roller
Releasing the switch during operation
could result in the cutter and bending
roller coming to a standstill to sandwich
the rebar and irremovably lock it in
place. (
Fig. 16
)
In this situation, the motor should be
reverse-rotated to return the cutter and
bending roller back to their original
positions.
Below are the two methods for returning
the cutter and bending roller during
operation.
Switch lock
Switch trigger
Fig. 14
1
2
1
Fig. 15
Ⓐ
Ⓑ
Alignment position
Setting dial
Bending roller
Bending
roller
Upper
cutter
Cover
Lever
Fig. 16
Bending
roller
Rebar
Rebar
Upper cutter
00Book̲VB3616DA̲ChS.indb 54
00Book̲VB3616DA̲ChS.indb 54
2019/10/09 14:11:29
2019/10/09 14:11:29
