background image

10

CHARGING

Before using the power tool, charge the battery as follows.

1.  Connect the charger’s power cord to the receptacle. 

 

When connecting the plug of the charger to a receptacle, 

the pilot lamp will blink in red (At 1- second intervals).

2.  Insert the battery into the charger.

  Firmly insert the battery into the charger as shown in 

Fig. 3 

(on page 20).

3. Charging

  When inserting a battery in the charger, the charge 

indicator lamp will blink in blue.

  When the battery becomes fully recharged, the charge 

indicator lamp will light up in green. (See 

Table 3

)

(1)  Charge indicator lamp indication

  The indications of the charge indicator lamp will be as 

shown in 

Table 3

, according to the condition of the 

charger or the rechargeable battery.

Table 3

Indications of the charge indicator lamp

Charge 

indicator 

lamp 

(RED / 

BLUE / 

GREEN / 

PURPLE)

Before

charging

Blinks

(RED)

Lights for 0.5 seconds. Does not light for 

0.5 seconds. (o

  for 0.5 seconds)

Plugged into power source

While

charging

Blinks

(BLUE)

Lights for 0.5 seconds. Does not light for 

1 second. (o

  for 1 second)

Battery capacity at less than 50%

Blinks

(BLUE)

Lights for 1 second. Does not light

for 0.5 seconds. (o

  for 0.5 seconds)

Battery capacity at less than 80%

Lights

(BLUE)

Lights continuously

Battery capacity at more than 80%

Charging 

complete

Lights

(GREEN)

Lights continuously

(Continuous buzzer sound: about 

6 seconds)

Overheat

standby

Blinks

(RED)

Lights for 0.3 seconds. Does not light for 

0.3 seconds. (o

  for 0.3 seconds)

Battery overheated. Unable to 

charge. (Charging will commence 

when battery cools)

Charging 

impossible

Flickers

(PURPLE)

Lights for 0.1 seconds. Does not light for 

0.1 seconds. (o

  for 0.1 seconds)

(Intermittent buzzer sound: about 2 seconds)

Malfunction in the battery or the 

charger

(2)  Regarding the temperatures and charging time of the rechargeable battery

 

The temperatures and charging time will become as shown in 

Table 4.

Table 4

Charger

UC18YSL3

Battery

Type of battery

Li-ion

Temperatures at which the 

battery can be recharged

0°C – 50°C

Charging voltage

V

14.4

18

Charging time, 

approx. (At 20°C)

BSL14xx series

BSL18xx series

Multi volt 

series

(4 cells)

(8 cells)

(5 cells)

(10 cells)

(10 cells)

min

BSL1415S : 15

BSL1415  : 15

BSL1415X : 15

BSL1420  : 20 

BSL1425  : 25

BSL1430C : 30

BSL1430  : 20

BSL1440  : 26

BSL1450  : 32 

BSL1460  : 38

BSL1815S : 15

BSL1815 : 15

BSL1815X : 15

BSL1820 : 20

BSL1825 : 25

BSL1830C : 30

BSL1830 : 20

BSL1840 : 26

BSL1850 : 32 

BSL1860 : 38

BSL36A18 : 32

BSL36B18 : 52

USB

Charging voltage

V

5

Charging current

A

2

NOTE

 

The recharging time may vary according to the ambient temperature and power source voltage.

00Book̲NT1865DBAL.indb   10

00Book̲NT1865DBAL.indb   10

2020/12/01   13:54:21

2020/12/01   13:54:21

Summary of Contents for NT 1850 DBSL





























Reviews: