6
English
5) Service
a) Have your power tool serviced by a quali
fi
ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out of reach of
children and in
fi
rm persons.
ROUTER SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2.
Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped
fi
rmly during
operation. (
Fig. 24
)
4. The bit is very hot immediately after operation. Avoid
bare hand contact with the bit for any reason.
5. Use bits of the correct shank diameter suitable for the
speed of the tool.
DESCRIPTION OF NUMBERED ITEMS
(Fig. 1–Fig. 24)
Lock pin
Template
Wrench
Bit
Loosen
Straight guide
Tighten
Guide plane
Stopper pole
Bar holder
Scale
Feed screw
Quick adjustment lever
Guide bar
Depth indicator
Wing bolt (A)
Pole lock knob
Wing bolt (B)
Stopper block
Tab
Counter-clockwise
direction
Dust guide
Loosen the lock lever
Screw
Knob
Dust guide adapter
Fine adjustment knob
Dial
Clockwise direction
Stopper bolt
Cut depth setting screw
Spring
Screw
Separate
Template guide adapter
Router feed
Centering gauge
Workpiece
Collet chuck
Rotation of bit
Template guide
Trimmer guide
Screw
Roller
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M12V2: Router
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Disconnect mains plug from electrical outlet
Class
II
tool
STANDARD ACCESSORIES
(1) Straight Guide ..............................................................1
(2) Bar Holder ....................................................................1
Guide
Bar
.....................................................................2
Feed
Screw
..................................................................1
Wing
Bolt
.....................................................................1
(3) Dust Guide ...................................................................1
(4) Dust Guide Adapter .....................................................1
(5) Template Guide ...........................................................1
(6) Template Guide Adapter ..............................................1
(7) Centering Gauge ..........................................................1
(8) Knob ............................................................................1
(9) Wrench ........................................................................1
(10) 8 mm or 1/4” Collet Chuck ............................................1
(11) Wing Bolt (A) ...............................................................4
(12) Lock Spring .................................................................2
Standard accessories are subject to change without notice.
APPLICATIONS
○
Woodworking jobs centered on grooving and
chamfering.
00Book̲M12V2.indb 6
00Book̲M12V2.indb 6
2021/08/26 11:42:22
2021/08/26 11:42:22
