HIKOKI G13SP Handling Instructions Manual Download Page 4

4

English

GENERAL POWER TOOL SAFETY WARNINGS

 WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in 

electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool.

1)  Work area safety

a)  Keep work area clean and well lit.

 

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive 

atmospheres, such as in the presence of 

fl

 ammable liquids, gases or dust.

 

Power tools create sparks which may ignite the dust 

or fumes.

c) Keep children and bystanders away while 

operating a power tool.

 

Distractions can cause you to lose control.

2) Electrical safety

a)  Power tool plugs must match the outlet.

 

Never modify the plug in any way.

  Do not use any adapter plugs with earthed 

(grounded) power tools.

 Unmodi

fi

 ed plugs and matching outlets will reduce 

risk of electric shock.

b)  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators.

  There is an increased risk of electric shock if your 

body is earthed or grounded.

c) Do not expose power tools to rain or wet 

conditions.

  Water entering a power tool will increase the risk of 

electric shock.

d)  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool.

  Keep cord away from heat, oil, sharp edges or 

moving parts.

  Damaged or entangled cords increase the risk of 

electric shock.

e)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

  Use of a cord suitable for outdoor use reduces the 

risk of electric shock.

f)  If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply.

 

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a)  Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

  Do not use a power tool while you are tired 

or under the in

fl

 uence of drugs, alcohol or 

medication. 

 

A moment of inattention while operating power tools 

may result in serious personal injury.

b) Use personal protective equipment. Always 

wear eye protection.

  Protective equipment such as dust mask, non-skid 

safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the 

switch is in the o

  position before connecting to 

power source and/or battery pack, picking up or 

carrying the tool.

 

Carrying power tools with your 

fi

 nger on the switch or 

energising power tools that have the switch on invites 

accidents.

d) Remove any adjusting key or wrench before 

turning the power tool on. 

 

A wrench or a key left attached to a rotating part of the 

power tool may result in personal injury.

e) Do not overreach. Keep proper footing and 

balance at all times.

  This enables better control of the power tool in 

unexpected situations.

f)  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts.

 

Loose clothes, jewellery or long hair can be caught in 

moving parts.

g) If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

these are connected and properly used.

  Use of dust collection can reduce dust-related 

hazards.

4)  Power tool use and care

a)  Do not force the power tool. Use the correct  

power tool for your application. 

 

The correct power tool will do the job better and safer 

at the rate for which it was designed.

b)  Do not use the power tool if the switch does not 

turn it on and o

 .

  Any power tool that cannot be controlled with the 

switch is dangerous and must be repaired.

c)  Disconnect the plug from the power source and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, 

or storing power tools. 

  Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

d)  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the 

power tool or these instructions to operate the 

power tool.

 

Power tools are dangerous in the hands of untrained 

users.

e)  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may a

 ect the power 

tool

ʼ

s operation.

 

If damaged, have the power tool repaired before 

use.

  Many accidents are caused by poorly maintained 

power tools.

f)  Keep cutting tools sharp and clean.

  Properly maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier to control.

g)  Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, 

taking into account the working conditions and 

the work to be performed.

  Use of the power tool for operations di

 erent  from 

those intended could result in a hazardous situation.

5) Service

a)  Have your power tool serviced by a quali

fi

 ed 

repair person using only identical replacement 

parts.

  This will ensure that the safety of the power tool is 

maintained.

PRECAUTION

Keep children and in

fi

 rm persons away.

When not in use, tools should be stored out of reach of 

children and in

fi

 rm persons.

000Book̲G13SP̲Asia.indb   4

000Book̲G13SP̲Asia.indb   4

2021/03/01   10:06:04

2021/03/01   10:06:04

Summary of Contents for G13SP

















Reviews: