11
English
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe the
following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
○
Lithium-ion batteries that exceed a power output of
100 Wh are considered to be in the freight classi
fi
cation
of Dangerous Goods and will require special application
procedures.
○
For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
Power Output
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○
Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○
When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○
There may be an occasional pause during USB
recharging.
○
When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○
It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1–Fig. 16)
Motor
Charge indicator lamp
Nameplate
Remaining battery
indicator switch
Push button
Remaining battery
indicator lamp
Side handle
Wheel washer (C)
Gear cover
Wheel nut
Depressed center
wheel (sold separately)
Wrench
Screw
With side guard
Wheel guard
Abrasive cutting wheel
(sold separately)
Switch
Diamond wheel
(sold separately)
Filter
Soft brush
Battery
Mesh
Latch
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
G1812DA / G1813DA: Cordless Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always operate the power tool with two hands
Not for cut-o
ff
operations
When using a cutting-o
ff
wheel, be sure to
attach the type A wheel guard.
when using a type B wheel guard for cutting-o
ff
operations with bonded cut-o
ff
wheels, there is
an increased risk of exposure to emitted sparks
and particles, as well as exposure to wheel
fragments in the event of a wheel burst.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
V
Rated voltage
n
Rated speed
n
0
No-load rotation speed
000Book̲G1812DA̲EU.indb 11
000Book̲G1812DA̲EU.indb 11
2022/08/30 15:34:29
2022/08/30 15:34:29
