English
33
HOW TO USE
1. How to drill holes (
Fig. 4
)
(1) Pull the switch trigger after applying the drill bit tip to the
drilling position.
(2) It is unnecessary to forcibly press the rotary hammer
main body. It is su
ffi
cient to slightly press the rotary
hammer to an extent that clips are freely discharged.
CAUTION
Although this machine is equipped with a slip
clutch, if the drill bit becomes bound in concrete
or other material, the resultant stoppage of the
drill bit could cause the machine body to turn in
reaction. Ensure that the main handle and side
handle are gripped
fi
rmly during operation.
2. How to chisel or crush (
Fig. 5
)
By applying the tool tip to the chiseling or demolishing
position, operate the rotary hammer by utilizing its
empty weight.
Forcible pressing or thrusting is unnecessary.
3. When drilling at “ro hammering”:
CAUTION
If you switch the selector lever during motor rotation, the tool can start to rotate
abruptly, resulting in unexpected accidents. Be sure to switch the selector lever
when the motor is at a complete stop.
(1) Switching to “ro hammering”
(a) Turn the selector lever.
(b) Align of the selector lever and of the crank
cover as illustrated in
Fig. 6
.
NOTE
Turn the selector lever to check if it is completely
locked and make sure that it does not turn.
4. When chipping and chiseling at “hammering”:
CAUTION
○
If the selector lever is switched during motor rotation, the tool can start to rotate
abruptly, resulting in unexpected accidents. Make sure to switch the selector lever
when the motor is at a complete stop.
○
If the bull point or cold chisel is used at the position of ”ro hammering”, the
tool can start to rotate, resulting in unexpected accidents. Make sure that they are
used at the position of ”hammering”.
Fig. 4
Fig. 5
Fig. 6
Selector lever
000Book̲DH52ME̲ChS.indb 33
000Book̲DH52ME̲ChS.indb 33
2017/12/14 16:06:23
2017/12/14 16:06:23
