HIKOKI DH 36DMA Handling Instructions Manual Download Page 15

15

2. Charger

Symptom

Possible cause

Remedy

The charge indicator lamp 

rapidly 

fl

 ickers purple, and 

battery charging doesn’t 

begin.

The battery is not inserted all the way.

Insert the battery 

fi

 rmly.

There is foreign matter in the battery 

terminal or where the battery is attached.

Remove the foreign matter.

The charge indicator lamp 

blinks red, and battery 

charging doesn’t begin.

The battery is not inserted all the way.

Insert the battery 

fi

 rmly.

The battery is overheated.

If left alone, the battery will automatically 

begin charging if its temperature decreases, 

but this may reduce battery life. It is 

recommended that the battery be cooled in 

a well-ventilated location away from direct 

sunlight before charging it.

Battery usage time is short 

even though the battery is 

fully charged.

The battery’s life is depleted.

Replace the battery with a new one.

The battery takes a long 

time to charge.

The temperature of the battery, the charger, 

or the surrounding environment is extremely 

low.

Charge the battery indoors or in another 

warmer environment.

The charger’s vents are blocked, causing its 

internal components to overheat.

Avoid blocking the vents.

The cooling fan is not running.

Contact a HiKOKI Authorized Service 

Center for repairs.

The USB power lamp 

has switched o

  and the 

USB device has stopped 

charging.

The battery’s capacity has become low.

Replace the battery with one that has 

capacity remaining.
Plug the charger’s power plug into an 

electric socket.

USB power lamp does not 

switch o

  even though the 

USB device has 

fi

 nished 

charging.

The USB power lamp lights up green to 

indicate that USB charging is possible.

This is not a malfunction.

It is unclear what the 

charging status of a USB 

device is, or whether its 

charging is complete.

The USB power lamp does not switch o

  

even when charging is complete.

Examine the USB device that is charging to 

con

fi

 rm its charging status.

Charging of a USB device 

pauses midway.

The charger was plugged into an electrical 

socket while the USB device was being 

charged using the battery as the power 

source.

This is not a malfunction.

The charger pauses USB charging for about 

5 seconds when it is di

 erentiating between 

power sources.

A battery was inserted into the charger while 

the USB device was being charged using a 

power socket as the power source.

Charging of the USB device 

pauses midway when the 

battery and the USB device 

are being charged at the 

same time.

The battery has become fully charged.

This is not a malfunction.

The charger pauses USB charging for 

about 5 seconds while it checks whether 

the battery has successfully completed 

charging.

Charging of the USB device 

doesn’t start when the 

battery and the USB device 

are being charged at the 

same time.

The remaining battery capacity is extremely 

low.

This is not a malfunction.

When the battery capacity reaches a certain 

level, USB charging automatically begins.

0000Book̲DH36DMA.indb   15

0000Book̲DH36DMA.indb   15

2018/05/17   14:49:34

2018/05/17   14:49:34

Summary of Contents for DH 36DMA





















Reviews: