Installation Guide
INSTALL_GATEWAY-V5
2019/01 Edition
Page 11
Plug this set up connector to the female Ethernet connector on the back of the GATEWAY.
4.3.2 GATEWAY arm
’s mounting process
The GATEWAY is delivered ready to be installed. HIKOB highly recommends using RAM
MOUNTS
®
products that can be optionally purchased with your GATEWAY, ask your vendor.
This is a set of 3 elements:
RAP-379U-M616
A first ball joint with a male screw that does the female thread on
any 4 holes of the GATEWAY casing.
RAM-2461U
A second ball joint, to be mounted on a wall or a pole. It can be
either screwed or attached with plastic clamps, or any method that
suits your environment constraints.
RAM-201U-B
And the double socket arm allowing good adjustment.
Figure 4
– View of the GATEWAY attached on a pole with RAM mount joints
