Heat Resistant Bullet Camera · Quick Start Guide
4
2.
Connect ③ (G1/2 air outlet) and ④ (G1/4 air inlet) with ⑤
(adapter), then the compressed air can remove the dust on the
device window.
Figure 3-9
Dedusting Installation
3.
Wrap the screwed pipe with thermal insulation materials.
Aerogel and aluminum silicate are recommended.
3.3.2
Water Cooling and Dedusting Installation
You can introduce cooling water to reduce the cavity
temperature of the device.
Steps:
1.
Connect the cooling water outlet and ⑥ (G1/2 water inlet) at
the bottom of the device with ② (one G1/2 screwed pipe),
and connect the backwater inlet and ⑦ (G1/2 water outlet) on
the top of the device with ② (the other G1/2 screwed pipe).
Figure 3-10
Pipe Connection for Water Cooling
Note:
Make sure the sealing gaskets at the ends of the pipes are well
installed, or the waterproof effect may be affected.
2.
Connect the compressed air outlet and ④ (G1/4 air inlet) at
the top of the device with ⑧ (G1/4 screwed pipe), then the
compressed air can remove the dust on the device window.
Figure 3-11
Dedusting Installation
Note:
The length of the screwed pipe in the package is 1 m, and you
can purchase the pipe according to the actual installation
requirement.
3.
Wrap the three screwed pipes with thermal insulation
materials. Aerogel and aluminum silicate are recommended.
4
Activate and Access Network Camera
Visit www.hikmicrotech.com to download and install HIKMICRO
Studio. Refer to the user manual of the device for detailed
operation.
Legal Information
© 2022 Hangzhou Microimage Software Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons.
Please find the latest version of this Manual at the HIKMICRO
website (www.hikmicrotech.com/).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks Acknowledgement
and other HIKMICRO’s trademarks and logos are
the properties of HIKMICRO in various jurisdictions.
Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS”
AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
