Hikmicro HM-TD2A67H1-15/Q, Quick Start Manual

Page: 7 / 14

5
English
1. Overview
1.1
Brief Description
The thermographic network box camera is a device that integrates remote
Internet surveillance, video server and HD camera functions.
Remote transmission, preview, and configuration can be realized through
browsers and clients. The device can be simply installed without structured
cabling system.
It can be used independently, or be combined with devices like robots for
into devices like robots for equipment maintenance, failure detection,
industrial process control, etc.
1.2 Component & Interface (Page 1 – A)
No. Component & Interface Description
1 Thermal Lens View the thermal image
2 M3 Thread Holes Install screws.
3 Network Indicators ● Flash: Transmit network data.
● Solid: The network is connected
without data transmission.
4 Network Interface RJ-45, network communication
5 I/O Interface Connect to power supply and
transmit data.
6 Reset Button Press for 10 s and release the
button, and the device will restore
to factory settings.
7 Grounding Screw Connect to grounding terminal to
ensure electrical safety.
8 Power Indicator ● Solid Green: Operating.
● Solid Red: System is operating.
1.3
Pin Electrical Interface (Page 2 – B)
No. Signal Description
1 Power Power Input
2 GND Grounding
3 RS232_RX Device Setup
4 RS232_TX Device Setup
5 ALARM_IN
1, Alarm Input and Output
6 ALARM_OUT
7 RS485-
RS-485 Serial Port Communication
Interface
8 RS485+
9 GND
Analog Video Onput
0 CVBS
2. Installation
Before you start: