9
2. Open the oven door and keep it open while lighting the burner. (Do not
attempt to light oven with oven door closed.)
3. Turn the gas cylinder valve to the ON position. Then, push and turn the oven control knob
to the IGNITE/HIGH position, the piezo igniter will make a spark sound.
4. Once burner is lit, continue to hold down control knob for ten (10) seconds before releasing it.
5. If the burner fails to light, turn the knob to the OFF position and try again.
NOTE: Preheat oven before cooking food. Let oven preheat for 15 minutes before use.
Lighting the Stove
1. Turn gas cylinder valve to the ON position.
2. Turn the stove control knob a half (1/2) counter-clockwise and press the piezo igniter button
a few times.
3. If the burner fails to light after several attempts, then you can use a long barbecue match to
light the stove instead.
CARE & MAINTENANCE
Spiders and small insects may have found their way into the burner tubes of the appliance. Insects’
nests and webs can obstruct gas flow which can result in a fire in the burner tubes. Inspect and clean
the burner tubes thoroughly before starting up your appliance.
If for some reason the unit is not working and can’t be fixed correctly, please do not use unit until it is
serviced and repaired by an authorized person.
The openings at the base of burner provide air for combustion and should never be obstructed. If the
flame becomes significantly orange-colored (rather than blue), check these openings for a blockage.
NOTE: Burner tubes should be checked and cleaned periodically.
OFF
OFF
ON
LOW
OVEN GAS CONTROL
STOVE GAS CONTROL
HIGH
IGNITE/
