Technical Specification
©2006
– 2013 by HIKVISION. All rights reserved.
image and SSL encryption.
Remote JPEG image capturing with user-defined image resolution and
quality.
PTZ Control
Support Multiple PTZ Protocols
Different channels can be configured with protocol type, RS-485 address,
baud rate, data bit, stop bit, even & odd parity, stream control method, etc.;
and remote configuration of presets, patrols and patterns.
Digital Zooming (with Speed Dome)
When connected with Hikvision speed dome, digital zooming can be realized
by clicking on the image through client software.
PTZ linkage
Relay input alarm can be responded with PTZ linkage actions, e.g., callup of
predefined presets, patrols or patterns.
Alarm
Relay Alarm Input
Either NO mode or NC mode can be set.
Four different alarm arming periods are configurable.
Capabilities of triggering corresponding alarm handling methods, relay
alarm output, buzzer alarm, upload to control center, PTZ linkage,
presets/patrols/patterns callup, etc.
Relay Alarm Output
Relay alarm output can be connected with alarm devices for alarm handling
within arming period.
Exceptions
Exception Alarm Handling
Exception alarms include network disconnect alarm, IP address conflict
alarm, illegal access alarm, etc.; multiple alarm handling methods are
supported, relay alarm output, buzzer alarm, upload to center, etc.
Exception Reboot
Software watchdog capability: for inspecting important threads and system
resources of device; in case of exceptions detected, the device will be
automatically rebooted.
Firmware watchdog: for inspecting the firmware of device; in case of
exceptions in system task scheduling, the device will be automatically
rebooted.
Logs
The system logs can be classified into the operation logs, alarm logs,
exception logs and information logs. User may search and view all recorded
system logs by date or type, as well as export the logs to the text format
over network.
